Nano Science And Technology Museum

Project idea

The device consists of a needle passing over the
surface to be scanned, the needle is installed on
horizontal holder so that the needle is
perpendicular to that holder and perpendicular to
the surface at the same time, the holder is rising and
falling with rising and falling of the needle according
to the terrain in the surface, where the needle read
the coordinates of the points of the surface to be
scanned and give them to the computer to form
a three-dimensional surface and zoom it in millions
of times. When the needle is approaching from the
sample surface, a force between the needle head
and the surface of the sample is generated and this
leads to a deviation of arm and read the surface.
The basis of the design idea is the (AFM), there will be a contact between the (AFM) device and the surface of the sample, Where the Earth's surface is the surface of the sample and the blocks above
the ground is the scanning device.
​
In order to simulate the forms of scanned surfaces and get similar forms on the ground surface of the project, Laboratories placed underground to get the topography of the earth surface by natural
skylight as shaped cercle, and making a big hole with a circular shape for getting topography where there's a tip descends in the middle of the hole. The building is consists of 2 boxes each box
represents the on the surface of the sample in a particular position.

Project description

Green Architecture /Zero Energy

Technical information

All materials are made with Nano technology Science

Documentation

Show PDF 1